Audi RS3 (OPF, ab 2019) [8V Facelift] Exhaust flap control RX2

Product number: A-029-006_1

€398.00*

Prices incl. VAT plus shipping costs

Control via SSA button

SSA-Memory

Plug & Play install

in the footwell and in the center console

Manual flap controls and Memory Modules are NOT permitted on public roads in Germany.

Product information "Audi RS3 (OPF, ab 2019) [8V Facelift] Exhaust flap control RX2"

With our valve control for your Audi RS3 (OPF, ab 2019) [8V Facelift], you have the option to manually switch the exhaust valves.
The control is done using the SSA button and alternatively via our classic remote control. This gives you full control over your vehicle's sound!

After installation, you can control the exhaust valves as well as the start-stop function via the start-stop button. Additionally, the module features an SSA memory and restores the start-stop state upon vehicle start.

Functionality and Benefits

Control via Start-Stop Button

SSA 5sec

Holding the Start-Stop Button

By holding the SSA button, you can switch between controlling the valves and the standard start-stop automatic.

SSA 1x

Click on Start-Stop Button

With a click on the SSA button, the valves or the start-stop automatic are controlled. (depending on the active mode)

Control via Remote Control (alternative)

Function Description in Video

https://www.youtube.com/watch?v=vb7beGiLq7E

Additional Functions and Benefits

SSA Memory

Setting of the start-stop automatic is saved and restored after vehicle start

Control Independent of Driving Profile

You decide on the vehicle sound, not the selected driving profile

Correct Standard Mode

Important for visits to the workshop

Can be activated via the SSA button

Freely Programmable Start Mode

You decide on the sound at vehicle start

No Intervention in the CAN Bus

No risk to other control units

No influence of software updates on the control

Plug & Play with Original Connectors

No damage to the original cables, no use of current thieves

Can be reverted at any time without any traces

Remote Control

High quality with brushed stainless steel front

High range

Installation

The installation is plug and play in the footwell behind the A-pillar trim (instructions are included in the delivery).

Start Mode

The start mode describes in which mode the device should start after turning on the ignition. In the standard configuration, the device saves the last set mode and restores it at vehicle start. If you want a specific mode when starting, regardless of how you parked your vehicle, this can be programmed.

The start mode can be freely programmed as desired

Last State: Press the button for the “Sport Mode” 5 times within 5 seconds.
Other Modes: Press the button for the mode you want to set as the start mode for about 10 seconds.

The flaps open and close 5 times to confirm the successful programming of the start mode.