Audi RS3 (OPF, ab 2019) [8V Facelift] Exhaust flap control CB2

Product number: A-005-024_1

€425.00*

49a8e82fec60499a977d9ceab048ad61

Control via Drive Select SSA-Memory Transmission S-Detection

Control via Drive Select

SSA-Memory

Transmission S-Detection

Plug & Play install

in the footwell

Product information "Audi RS3 (OPF, ab 2019) [8V Facelift] Exhaust flap control CB2"

With this control unit, you have the option to control your exhaust flaps via the Drive Select and the ESP button.


Functionality and Benefits

Drive Select (Individual: Engine Sound)
Dynamic

The exhaust flaps are permanently open, thus increasing the volume. The result is a sporty sound.

Auto

Flaps open at 3000rpm / 80% throttle (just before kickdown)

Comfort

Flaps open at 4500rpm / 80% throttle (just before kickdown)

Easy Switch
ESC 2x
Double-click on the ESC button

With a double-click on the ESP button, the flaps can be opened and closed independently of the Drive Select. The automatic opening at 4500rpm is always retained.

Series / Workshop Mode
SSA 7sec
Hold the SSA button for 7 seconds

Hold the SSA button for 7 seconds, and the module will be deactivated. Everything behaves as if no module is installed. As feedback for a successful activation or deactivation, the SSA light will automatically switch.

Function Description in Video

https://www.youtube.com/watch?v=oZnlVODGBWw

Additional Features and Benefits

1)
Transmission S-Detection

As soon as you switch the transmission to S, both flaps open.
(Function only available with original transmission coding)

2)
SSA-Memory

Setting of the start-stop automatic is saved and restored after vehicle start

3)
Safe and Permanent Operation

This device is specifically designed for use with electric flap systems

4)
Plug & Play

Installation is done Plug & Play in the footwell behind the A-pillar trim

Can be reverted at any time without leaving any traces


Note: The misfire was not programmed by Audi in the RS3 8V facelift with OPF from the factory. Therefore, there can also be no functioning misfire memory function.

Installation

The installation is done plug and play in the footwell behind the A-pillar trim (instructions are included in the delivery).

Notes

  • No approval in the StVO (German Road Traffic Regulations)
  • For use in motorsport or for show purposes only
  • The flaps should not be completely closed during full load driving
  • Installation at your own risk
  • No liability is assumed for any damages resulting from disregarding the notes

Electrical devices and batteries must not be disposed of in household waste. Please observe our notes on disposal. "Notes on ElektroG / BattG"