Audi RS3 [8V VFL] Exhaust flap control CB2

Product number: A-005-022_1

€425.00*

e759d19345ea45fa9c0e13497738af5a

Control via Drive Select SSA-Memory Transmission S-Detection Misfire-Memory

Control via Drive Select

SSA-Memory

Transmission S-Detection

Misfire-Memory

Plug & Play install

in the footwell

Product information "Audi RS3 [8V VFL] Exhaust flap control CB2"

With this control unit, you have the option to control your exhaust flaps via the Drive Select and the ESP button.


Functionality and Benefits

Drive Select (Individual: Engine Sound)
Dynamic

The exhaust flaps are permanently opened, thus increasing the volume. The result is a sporty sound.

Auto

Flaps open from 3000rpm / 80% throttle (just before kickdown)

Comfort

Flaps open from 4500rpm / 80% throttle (just before kickdown)

Easy Switch
ESC 2x
Double-click on the ESC button

With a double-click on the ESP button, the flaps can be opened and closed independently of the Drive Select. The automatic opening at 4500rpm is always retained.

Series / Workshop Mode
SSA 7sec
Hold SSA button for 7 seconds

Hold the SSA button for 7 seconds, and the module will be deactivated. Everything behaves as if no module is installed. As feedback for a successful activation or deactivation, the SSA light will automatically switch.

Function Description in Video

https://www.youtube.com/watch?v=oZnlVODGBWw

Additional Features and Benefits

1)
Transmission S-Detection

As soon as you set the transmission to S, both flaps open.
(Function only available with original transmission coding)

2)
SSA-Memory

Setting of the start-stop automatic is saved and restored after vehicle start

3)
Misfire-Memory

The misfire remains in Dynamic (Individual: Engine/Transmission) even after the engine starts

No annoying switching through necessary (exclusive for this model without OPF)

4)
Safe and Permanent Operation

This device is specifically designed for use with electric flap systems

5)
Plug & Play

Installation is done Plug & Play in the footwell behind the A-pillar trim

Can be reverted at any time without any traces

Installation

The installation is plug and play in the footwell behind the A-pillar trim (instructions are included in the delivery).

Notes

  • No approval in the StVO (German Road Traffic Regulations)
  • For use in motorsport or for show purposes only
  • The flaps should not be completely closed during full load driving
  • Installation at your own risk
  • No liability is assumed for any damages resulting from disregarding the notes

Electrical devices and batteries must not be disposed of in household waste. Please observe our notes on disposal. "Notes on ElektroG / BattG"